Best Bandsaw For Resawing – 2023 Reviews & Buying Guide

This post may contain affiliate links. You can view the affiliate disclosure here.

Best Bandsaw For Resawing

One of the most underrated woodcutting tools is the band saw. A good number of novice woodworkers consider using a table saw or miter saw and haven’t discovered the versatility and precision that a band saw offers.

Resawing is one of the basic ways of cutting wood; it can be used in specific applications to give similar cuts to those of a rip cut. Resawing involves cutting through the thick side of the board’s center to create two narrower boards. Getting the best bandsaw for resawing can help you create marvelous projects and carry out extreme intricate cuts with ease.

There are many manufacturers in the bandsaw industry and choosing the best can be quite difficult. When planning to buy a good bandsaw for resawing purposes, a number of things need to be considered.

To begin with, you have to decide if you need the flexibility of a wireless device. You then need to know the thickness of your cuts so as to choose the right tool that will achieve those cuts. Before even reaching that final decision, you should also determine how much you expect to use the tool. This will help you buy the bandsaw that has been designed for the right usage.

The other factors you should consider before buying the top bandsaw for resawing include price, frame, power, capacity and base sturdiness.

My Top 3 Picks

I have compiled a list of the top 3 bandsaws that are ideal for resawing purposes. This section covers a detailed review of each of the three products.

My research and first-hand experience leads me to the following picks:

  1. WEN 3962 Two-Speed 10″ Band Saw
  2. Laguna Tools MBAND1412-175 14 x 12 Bandsaw
  3. Grizzly G0513 2 HP 17-Inch Band Saw

1. WEN 3962 Two-Speed 10″ Band Saw

Best Bandsaw For Resawing

The WEN 3962 Bandsaw

This is our top pick and it incorporates a number of attractive features that enhance its overall usability.

To start with, it comes with a 3.5 amp motor that has the capacity to generate up to 2620 FPM. This motor gives you enough power needed for tackling tough resawing jobs.

Running on 120 volts enables this machine to carve through thick boards in a single pass. You can carve through boards as thick as 9.75 inches more easily than other comparable 10-inch bandsaws.

It can handle a range of timber products including hardwood. The unit has a small footprint measuring 20 by 25 by 58 inches; this enables it to use minimum storage space in your workshop.

The bandsaw (1) includes a 3-in-1 dust port that can be fitted with a number of dust collection hose sizes including 1.75 inch size, 2.75 inch and 4 inch. The blade can be operated at two speeds of either 1520 ft/min or 2620 ft/min.

Depending on the intricacies needed, there are a variety of blade options to use. A 72-inch blade can be used anywhere from 1/8 to 1/2 inch of thickness. Having been equipped with full resaw capacity of 6 inches, you can cut wood in a single pass. You can also create deep angled cuts of up to 6 inches by beveling the table up to 45 degrees to the right.


  • Has a dual-speed functionality of cutting at 1520 feet per minute or 2620 ft/min.
  • Has a light, enabling work in dim conditions without getting your line obscured.
  • Comes with a two-year warranty and a dedicated helpline.


  • Doesn’t have a cut out for professional use.
  • It can be quite the task to make adjustments.

Go here to get the current price of the WEN 3962!

2. Laguna Tools MBAND1412-175 14 x 12 Bandsaw

Best Bandsaw For Resawing

The Laguna Tools MBAND1412-175 Bandsaw

This is a high-quality Laguna Tools bandsaw that comes with a great grey and black design. It is an ideal tool for resawing projects, having been stacked with a number of amazing features.

One such feature is the powerful 1.75hp motor that is able to cut effectively through materials. There is also a 21 x 16 inch micro-polished table. This table has been paired with a Hi/Low resilient aluminum fence.

It features solid cast wheels that are dynamically and electronically balanced. The wheels have been fitted with polyurethane tires that last longer and run cooler than conventional tires.

A 4-inch dust port is included under the rear of the guides; this allows you to connect a preferred shop vac to keep things spick and span in your workshop. You can also get an optional mobility kit that features a foot-activated lever for easy maneuverability.

The machine’s pinion and work gear is extremely smooth and has been designed for minimum flex even when fully extended. There is a double window that enables the user to check tension and tracking during operation.

Its durability is enhanced further by a two-tone paint finish. Its upscale ceramic guides are a great inclusion and are very helpful in resawing projects.

Some of its other features include a 14-inch deep throat, cast-iron trunions and steel frame. The trunions help reduce flexing and dampening vibrations during cuts.


  • It runs on 120V but can be rewired to adapt to 240V, making it ideal for various residential and commercial setups.
  • It has a large table that is extremely stable even when tilted.
  • It resaws with accuracy and precision, and gives you the flexibility to make high standard curved cuts.


  • It’s relatively expensive.
  • It doesn’t cut green wood well.

Go here to get the current price of the Laguna Tools MBAND1412-175!

3. Grizzly G0513 2 HP 17-Inch Band Saw

Best Bandsaw For Resawing

The Grizzly G0513 Bandsaw

If you need a heavy duty bandsaw that has a respectable cutting capacity, then the Grizzly G0513 is  an ideal choice. It comes with a 17-inch saw that can cut through large pieces of timber without any difficulty.

It has a 16.25-inch throat that can be used for a variety of applications. The machine has many attractive features including dual 4-feet dust ports, a deluxe fence, heavy duty miter gauge, micro-adjusting geared table and European style blade guides.

It has a 2 HP motor that is able to run on single-phase electricity and minimize the complications of using it in a home setup. With this machine, you are able to cut wood to a maximum capacity of 12 inches.

It is a rigid and stable tool in any workshop due to its weight of 342 pounds. This weight is very helpful when it comes to working with large pieces of material. The size of the saw is 73 x 32 x 32 inches. The blade runs at two speeds of 1600 and 3500 feet per minute.

Its large table has been made from cast-iron while its fence is made of aluminum. The cast iron construction gives it the robustness it deserves. A blade tension indicator and an integrated blade tracking window enable quick changes to the blade release and tension system.

Making micro-adjustments has been made easier with this machine as it can tilt 10 degrees to the left and 45 degrees to the right. The table can be neatly locked in place to facilitate a rock-solid cutting experience.


  • The machine gives you an impressive 12-inch cutting capacity.
  • It has a quick release system for conveniently swapping and adjusting the blade.
  • It comes with a handy indicator for displaying blade tension.


  • The speed of the blade is on the slow side.
  • To change the blades, the door has to be fully opened.

Go here to get the current price of the Grizzly G0513!

My #1 Recommendation

While the bandsaws above have been given my stamp of quality and have earned a spot on this page, there’s one bandsaw model that I recommend above all others for resawing…

HERE is my #1 recommended band saw for resawing.


Whether you’re an aspiring woodworker, DIY enthusiast, or home workshop owner, resawing offers you a great opportunity to save money and materials. By cutting rough lumber, you save a lot of costs associated with purchasing pre-milled lumber. Resawing also gives you the flexibility to produce your own veneers.

Even though you can resaw using a table saw (table saw buying guides like this can be found elsewhere on Carve Your Creation), a bandsaw provides a more precise and standardized way to do it. The best bandsaw should, therefore, have the features that can help you meet your resawing needs more efficiently.

Good luck shopping for your bandsaw!

Thanks for reading my buying guide. If you have any questions, feedback or comments, don’t hesitate to drop them in the comments below. You can share this page using the buttons below.

You may also like...

3 Responses

  1. Jack says:

    Hello Scott. I’m looking for a good bandsaw for resawing and I just came across this article. These are interesting options, but the latter two are way outside my budget. I know this is a bit off topic, but I thought this would be a good place to get my question answered: what’s the key to getting straight cuts with a bandsaw? I’ve struggled with it in the past. Thanks, Jack

    • Scott says:

      Thanks for checking out the guide Jack, and I hope it helped you. The Laguna Tools and Grizzy models are indeed quite expensive, but they’re fantastic bandsaws.

      As for your question, to get straight cuts, you should align the blade itself with the guide/fence. It turns out that this isn’t the easiest thing to do, but it is certainly possible. Another tip is to have three teeth in the material at any one time. For more on this, I would suggest doing an internet search.

      Good luck in your search for a bandsaw!

  2. Steav Smith says:

    Good bandsaw recommendations. I’m close to deciding on a model – I’ll let you know which one I go with!

Leave a Reply

Your email address will not be published. Required fields are marked *